Passer au contenu principal
  • Passer des commandes rapidement et facilement
  • Afficher les commandes et suivre l’état de votre expédition
  • Créez et accédez à une liste de vos produits
  • Gérer vos sites, vos produits et vos contacts au niveau des produits Dell EMC à l’aide de la rubrique Gestion des informations de l’entreprise.

Dell Command | Monitor Version 9.1 SNMP Reference Guide

PDF

Dell Command | Monitor management instrumentation base

The Dell Command | Monitor MIB (10909.mib) provides instrumentation data that allows you to monitor the health of a client system with SNMP management applications. It provides:
  • Information about the status at key points in the system.
  • Rapid access to detailed fault and performance information gathered by industry-standard systems management agents.
  • Version information for BIOS, firmware, and operating system.

In addition, traps are sent to report a change in status of the health of critical components.

The Dell Command | Monitor MIB structures the MIB objects into groups of scalar objects or MIB tables that provide related information. The following describes each Dell Command | Monitor MIB group and lists the MIB group number assigned to the MIB group. The Dell Command | Monitor MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10909.1.< MIB group number> , where < MIB group number> is the number assigned to the MIB group.
  • NOTE: From Dell Command | Monitor version 9.0 onwards, the 10892 MIB is not supported. The 10909 MIB deprecates 10892 MIB and identifies only client systems.
  • NOTE: You cannot perform write and set operations on MIB group variables.

Évaluez ce contenu

Précis
Utile
Facile à comprendre
Avez-vous trouvé cet article utile ?
0/3000 characters
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez attribuer une note (1 à 5 étoiles).
  Veuillez indiquer si l’article a été utile ou non.
  Les commentaires ne doivent pas contenir les caractères spéciaux : <>()\