Dell Chassis Management Controller for Dell EMC PowerEdge FX2 Version 2.0 Release Notes

Release 2.0

Supporting PowerEdge FC640 sled on the PowerEdge FX2/FX2s chassis.
Enabling Fault Tolerant Power Supply Redundancy control.
Updating the physical mapping of TOR switch ports to Dell EMC's 14th generation server ports using LLDP open source package version 0.7.7.
Supporting X16 Gen 3 PCIe IDT retimer Mezz Card.
Collecting CMC dumplogs as part of the server's SupportAssist tab.
- Integrating ZIP open source package version 3.0 for SupportAssist.
- Integrating LSOF open source package version 4.86 for SupportAssist.
Monitoring CMC Fan sensors PWM using RACADM:
- getsensorinfo
Integrating the event filter configurations on chassis profile XML file.
Updating the OpenSSL open source package to version 1.0.2K.
Updating the OpenSSH open source package to version 7.4p1.
Updating enterprise OID in the SNMPv3 trap.
Extending SNMP protocol and custom discovery port configuration in GUI.
Extending SNMPv3 trap configuration support in WSMan.
Configuring CMC using WSMan for the following SNMPv3 user attributes:
- userAdminSNMPv3Enable
- userAdminSNMPv3AuthenticationType
- userAdminSNMPv3PrivacyType
Monitoring CMC using WSMan for the following sensors:
- Fan sensor speed
- Temperature sensor for chassis and servers
Supporting 2400W PSU on CMC version >= 1.4x.

Federal Information Processing Standards (FIPS) certified. Certification Number: #2861. For details, see www.csrc.nist.gov/groups/STM/cmvp/documents/140-1/140val-all.htm#2861

Federal Information Processing Standards (FIPS) 140-2 cryptography capability.
Disabling AC Power Recovery.
Performing racresetcfg from CMC GUI.
Updating the OpenSSL open source package to version 1.0.2f.
Updating the OpenSSH open source package to version 7.1p1.
Updating glibc to version 2.23 to address new security vulnerabilities.
TLS 1.2 and TLS 1.1 by default.
User configuration option to enable TLS 1.0 using RACADM.
SNMPv3 configuration only in RACADM.
Querying the health status of the chassis components using WSMan.
Initiating Quick Deploy of blade through RACADM.
Configuring CMC using WSMan for the following features:
- Host Name of Chassis
- IP Configuration
- DNS
- DNS Registration
- NTP
- Change Default Password
Sending alerts when the power state of an IOM changes and when a power ON of IOM fails.
Populating CMC Device name correctly in the inventory.

Firmware and driver refresh of COMMs cards on Dell's 13th generation of PowerEdge servers.
Capture and replicate chassis configurations through XML, based on the Chassis Configuration Profile.
Support for blinking server identification LED from Quick Link on the Homepage.
Backup or restore through XML, based on the Chassis Configuration Profile.
Create and deploy a library of Boot Identity Profiles (boot from iSCSI/SAN configurations) to enable quick restore of workload to a spare server.
Populate iDRAC DNS setting from the CMC Quick Deploy page.
Display iDRAC DNS name as the slot name.
Option to view iDRAC LCLog results directly in CMC after applying a Server Configuration Profile.
Support for Secure IOM mode. Secure IOM provides additional CMC security to support IOMs running in UC-APL secured environments.
Support for launching IOA GUI on the Homepage and I/O Module overview page.