메인 콘텐츠로 이동
로그아웃

환영합니다.

내 계정
  • 빠르고 간편하게 주문
  • 주문 보기 및 배송 상태 추적
  • 제품 목록을 생성 및 액세스
  • 회사 관리를 사용하여 Dell EMC 사이트, 제품 및 제품 수준 연락처를 관리하십시오.
로그인 계정 만들기 프리미어 로그인 Partner Program 로그인
문의처

Dell.com 카트

Dell Lifecycle Controller Remote Services v2.30.30.30 Quick Start Guide

PDF

Exceptions while importing server profile

On certain Dell devices, successful application of a server configuration profile requires two imports. The first import of the profile enables hidden devices that are then configured with a second import.

Two imports are required while performing following actions:
  • Enabling RAID mode on storage controllers — PERC S110 and PERC S130 require two imports – one to set the embedded SATA controller to RAID mode and the second to configure the RAID controller for operations such as creating a virtual disk.

    Example:

    If the EmbSata BIOS attribute on the import system is not set to RAIDMode, then the first import must contain the following: 
    <Component FQDD="BIOS.Setup.1-1">
                                          	<Attribute Name="EmbSata">RaidMode</Attribute>
                                          </Component>
    The second server import is to apply the configuration on the PERC controller: 
    <Component FQDD="RAID.Embedded.1-1">
                                          	<Attribute Name="RAIDresetConfig">False</Attribute>
                                          	<Attribute Name="RAIDforeignConfig">Ignore</Attribute>
                                          <Component FQDD="Disk.Virtual.262145:RAID.Embedded.1-1">
                                          <Attribute Name="RAIDaction">Create</Attribute>
                                          <Attribute Name="Name">Virtual Disk 1</Attribute>
                                          <Attribute Name="Size">0</Attribute>
                                          <Attribute Name="StripeSize">128</Attribute>
                                          <Attribute Name="SpanDepth">1</Attribute>
                                          <Attribute Name="SpanLength">2</Attribute>
                                          <Attribute Name="RAIDTypes">RAID 0</Attribute>
                                          <Attribute Name="IncludedPhysicalDiskID">Disk.Direct.0-0:RAID.Embedded.1-1</Attribute>
                                          <Attribute Name="IncludedPhysicalDiskID">Disk.Direct.1-1:RAID.Embedded.1-1</Attribute>
                                          </Component>
                                          <Component FQDD="Disk.Direct.0-0:RAID.Embedded.1-1">
                                          	<Attribute Name="RAIDPDState">Ready</Attribute>
                                          </Component>
                                          <Component FQDD="Disk.Direct.1-1:RAID.Embedded.1-1">
                                          <Component FQDD="Disk.Direct.1-1:RAID.Embedded.1-1">
                                          	<Attribute Name="RAIDPDState">Ready</Attribute>
                                          </Component>
                                          </Component>
  • Enabling PCI slots — PCI slots in the system that are disabled in the BIOS require two imports – one to enable the slot and another to configure the card in the slot.

    Example

    If the Slot1 BIOS attribute on the import system is disabled, the first import must contain the following: 
    <Component FQDD="BIOS.Setup.1-1">
                                          <Attribute Name="Slot1>Enabled</Attribute>
                                          </Component>

    A second import is required to configure the device in slot 1.

본 콘텐츠를 평가해주십시오.

정확함
유용함
이해하기 쉬운
이 문서가 도움이 되셨나요?
0/3000 characters
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  평점(별 1~5개)을 매겨주십시오.
  문서가 도움이 되었는지 여부를 선택하십시오.
  의견에는 <>()\와 같은 특수 문자를 사용할 수 없습니다.