Ga naar hoofdinhoud
Uitloggen

Welkom bij Dell

Mijn account
  • Snel en eenvoudig bestellen
  • Bestellingen en de verzendstatus bekijken
  • Een lijst met producten maken en openen
  • Beheer uw Dell EMC locaties, producten en contactpersonen op productniveau met Company Administration.
Inloggen Een account maken Inloggen bij Premier Aanmelden voor partnerprogramma
Contact

Uw Dell.com-winkelwagentjes

Dell PowerEdge R730xd Owner's Manual

PDF

Installing an expansion card into the expansion card riser 2 or 3

Prerequisites

  1. Follow the safety guidelines listed in the Safety instructions section.
  2. Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are shipped with your product.

Steps

  1. Unpack the expansion card and prepare it for installation.
    For instructions, see the documentation accompanying the card.
  2. Lift the expansion card latch and remove the filler bracket.
  3. Holding the card by its edges, position the card so that the connector on the expansion card aligns with the expansion card connector on the riser.
  4. Insert the card-edge connector firmly into the expansion card connector until the card is fully seated.
  5. Press the touch points to open the expansion card locking tabs.
  6. Close the expansion card latch.
    Figure 1. Installing an expansion card into the expansion card riser 2 or 3
    This figure shows installing an expansion card into the expansion card riser 2 or 3
    1. expansion card
    2. expansion card latch
    3. expansion card riser
    4. power connector (for GPU cards)
    5. expansion card connector
  7. If applicable, connect the cables to the expansion card.

Next steps

  1. Follow the procedure listed in the After working inside your system section.
  2. Install any device drivers required for the card as described in the documentation for the card.

Beoordeel deze inhoud

Nauwkeurig
Nuttig
Eenvoudig te begrijpen
Was dit artikel nuttig?
0/3000 characters
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Geef een beoordeling (1-5 sterren).
  Selecteer of het artikel nuttig is of niet.
  Opmerkingen mogen geen speciale tekens bevatten: <>() \