Dell OpenManage Server Administrator Version 7.3 User's Guide

Viewing Basic Information

You can view basic information about the BMC/iDRAC, IPv4 Address, and DRAC. You can also reset the Remote access controller settings to their default values. To do this:

NOTE: You must be logged in with Administrator privileges to reset the BMC settings.

Click the Modular Enclosure > System/Server Module > Main System Chassis/Main System > Remote Access

The Remote Access page displays the following base information of the system’s BMC:

Remote Access Device

Device Type
IPMI Version
System GUID
Number of Possible Active Sessions
Number of Current Active Sessions
LAN Enabled
SOL Enabled
MAC Address

IPv4 Address

IP Address Source
IP Address
IP Subnet
IP Gateway

IPv6 Address

IP Address Source
IPv6 Address 1
Default Gateway
IPv6 Address 2
Link Local Address
DNS Address Source
Preferred DNS Server
Alternate DNS Server

NOTE: You can view IPv4 and IPv6 address details only if you enable the IPv4 and IPv6 address properties under Additional Configuration in the Remote Access tab.

Boas-vindas

Boas-vindas à Dell

Dell OpenManage Server Administrator Version 7.3 User's Guide

Viewing Basic Information

Classifique este conteúdo