Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s User's Guide

Configuring generic LDAP directory service using RACADM

To configure the LDAP directory service, use the objects in cfgLdap and cfgLdapRoleGroup RACADM groups.

There are many options to configure LDAP logins. In most of the cases, some options can be used with their default settings.

NOTE: It is highly recommended to use the racadm testfeature -f LDAP command to test the LDAP settings for first time setups. This feature supports both IPv4 and IPv6.

The required property changes include enabling LDAP logins, setting the server FQDN or IP, and configuring the base DN of the LDAP server.

$ racadm config -g cfgLDAP -o cfgLDAPEnable 1

$ racadm config -g cfgLDAP -o cfgLDAPServer 192.168.0.1

$ racadm config -g cfgLDAP -o cfgLDAPBaseDN dc=
                                       company,dc=com

CMC can be configured to optionally query a DNS server for SRV records. If the cfgLDAPSRVLookupEnable property is enabled, the cfgLDAPServer property is ignored. The following query is used to search the DNS for SRV records:

_ldap._tcp.domainname.com

ldap in the above query is the cfgLDAPSRVLookupServiceName property.

cfgLDAPSRVLookupDomainName is configured to be domainname.com.

For more information about the RACADM commands, see the Dell Chassis Management Controller for PowerEdge FX2/FX2s RACADM Command Line Reference Guide available at dell.com/support/manuals.

Damos-lhe as boas-vindas

Damos-lhe as boas-vindas à Dell

Dell Chassis Management Controller Version 2.10 for PowerEdge FX2 and FX2s User's Guide

Configuring generic LDAP directory service using RACADM

Classifique este conteúdo