Dell OpenManage Deployment Toolkit Version 4.3 User's Guide

The RACREP.BAT or racrep.sh sample script applies RAC options to the target system based on configuration information that has been saved in the configuration file. User input is optional, depending on the variables set in the RACREP.BAT or racrep.sh sample script. On systems running Windows, RACREP.BAT script uses RACADM.EXE to configure RAC in the target system. On systems running Linux the racrep.sh script uses racadm wrapper script or the syscfg utility (depending on the version of RAC on your system) to configure RAC in the target system. The raccfg.ini is passed as the first parameter to these scripts. If this parameter is not passed, the default variables values used in these scripts are set in the TKENVSET.BAT or tkenvet.sh scripts. You can specify the IP address to configure the RAC as an optional parameter. The  raccfg.ini file is generated with the RACCAP.BAT or raccap.sh sample script. For information about using the RACCAP.BATor raccap.sh sample script to capture RAC configuration information, see RACCAP.BAT Or raccap.sh.