Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Blinking And Unblinking Virtual Disks

The following table lists the RAIDCFG options, parameters, and pre-defined arguments for blinking or unblinking a physical disk associated with a virtual disk.

Table 1. Blinking And Unblinking Virtual Disks
Mandatory Options and Arguments	Optional Parameters	Valid Parameters Arguments	Description
`-vd -vd=id ac=blink -c=id` or `vdisk vdisk=id action=blink controllerid=id`	NA	NA	Blinks the physical disks associated with the specified virtual disk on the specified controller. Example: A:>raidcfg -vd -vd=2 -ac=blink -c=2 RAIDCFG Command successful!
`-vd -vd=id ac=unblink -c=id` or `vdisk vdisk=id action=blink controllerid=id`	NA	NA	Unblinks the physical disks associated with the specified virtual disk on the specified controller. Example: A:>raidcfg -vd -vd=2 -ac=blink -c=2 RAIDCFG Command successful!

Добро пожаловать

Добро пожаловать в Dell

Dell OpenManage Deployment Toolkit Version 4.3 Command Line Interface Reference Guide

Blinking And Unblinking Virtual Disks

Оценить этот контент