Перейти к основному содержимому
  • Простое и быстрое размещение заказов
  • Просмотр заказов и отслеживание состояния доставки
  • Создание списка продуктов и доступ к нему
  • Управление узлами, продуктами и контактами уровня продуктов Dell EMC с помощью Company Administration.

Dell Command | Monitor Version 9.1 SNMP Reference Guide

PDF

Dell Command | Monitor management instrumentation base

The Dell Command | Monitor MIB (10909.mib) provides instrumentation data that allows you to monitor the health of a client system with SNMP management applications. It provides:
  • Information about the status at key points in the system.
  • Rapid access to detailed fault and performance information gathered by industry-standard systems management agents.
  • Version information for BIOS, firmware, and operating system.

In addition, traps are sent to report a change in status of the health of critical components.

The Dell Command | Monitor MIB structures the MIB objects into groups of scalar objects or MIB tables that provide related information. The following describes each Dell Command | Monitor MIB group and lists the MIB group number assigned to the MIB group. The Dell Command | Monitor MIB groups are identified by the SNMP OID 1.3.6.1.4.1.674.10909.1.< MIB group number> , where < MIB group number> is the number assigned to the MIB group.
  • NOTE: From Dell Command | Monitor version 9.0 onwards, the 10892 MIB is not supported. The 10909 MIB deprecates 10892 MIB and identifies only client systems.
  • NOTE: You cannot perform write and set operations on MIB group variables.

Оценить этот контент

Точно
Функционально
Просто понять
Помогла ли вам эта статья?
0/3000 characters
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Поставьте оценку (1–5 звезд).
  Выберите ответ на вопрос, была ли статья полезной.
  Комментарии не должны содержать следующие специальные символы: <>()\