Dell OpenManage Server Administrator Version 7.3 Command Line Interface Guide

Description	Converts RAID to non-RAID on a physical disk.
Syntax	`omconfig storage pdisk action=convertraidtononraid controller=id pdisk=< PDISKID>`, where id is the controller ID. The <PDISKID> variable specifies the physical disk. NOTE: To obtain these values, type omreport storage controller to display the controller IDs and then type omreport storage pdisk controller=ID to display the IDs for the physical disks attached to the controller. NOTE: To convert multiple RAID to non-RAID on a given controller, use omconfig storage controller action=convertraidtononraid command. For more information, see omconfig Convert Multiple RAID To Non-RAID .
Example to	Convert RAID to non-RAID on physical disk 3 on connector 0 of controller 1. On a SAS controller, the physical disk resides in enclosure 2.
Example for SAS controllers	`omconfig storage pdisk action=raidtononraid controller=1 pdisk=0:2:3`

Omconfig Convert RAID To Non-RAID