0
|
RAIDCFG Command successful!
|
1
|
Error! Incorrect Syntax.
|
2
|
Failure!
|
3
|
Illegal operation
|
4
|
Unsupported operation
|
5
|
Device not found.
|
6
|
Format boot drive illegal
|
7
|
Buffer too small.
|
8
|
Virtual Disk contains boot partition. Use force option
to delete.
|
9
|
Init boot drive failed.
|
10
|
Format boot drive failed.
|
11
|
Cannot write boot drive.
|
12
|
Unsupported RAID value.
|
13
|
Invalid RAID configuration.
|
14
|
Span depth not in range.
|
15
|
RAID 1 failed.
|
16
|
Exactly 2 array disks are required to create a RAID
1 virtual disk.
|
17
|
Unsupported stripe size value.
|
18
|
RAID 5 only.
|
19
|
RAID 5 error.
|
20
|
A minimum of 3 array disks are required to create a
RAID 5 virtual disk.
|
21
|
RAID 0 failed.
|
22
|
RAID 10 failed.
|
23
|
RAID 50 failed.
|
24
|
RAID 5 not supported.
|
25
|
RAID 50 not supported.
|
26
|
Size too small for given RAID type.
|
27
|
Wrong number of disks for RAID 1- concatenated.
|
28
|
Insufficient space to mirror disks.
|
29
|
Create Mirror not supported.
|
30
|
Disk in use.
|
31
|
Disk Lock operation failed.
|
32
|
Disk locked.
|
33
|
Disk Unlock operation failed.
|
34
|
Disk Unlocked.
|
35
|
Disk failed on rebuild.
|
36
|
Hot Spare not free.
|
37
|
Disk Diagnostic failed.
|
38
|
Disk Rebuild failed.
|
39
|
Disk Format failed.
|
40
|
Cancel of Disk Diagnostic failed.
|
41
|
Cancel of Disk Rebuild failed.
|
42
|
Cancel of Disk Format failed
|
43
|
Assign Hot Spare failed
|
44
|
Disk too Small for Hot Spare.
|
45
|
Unassign Hot Spare failed.
|
46
|
Prepare Disk for Removal failed.
|
47
|
Disk Online failed.
|
48
|
Disk Offline failed.
|
49
|
UnMount Operation failed.
|
50
|
Mount Operation failed.
|
51
|
Cannot Format Array Disk.
|
52
|
Bad chunk size.
|
53
|
Invalid disk.
|
54
|
Virtual disk not found.
|
55
|
Virtual disk locked.
|
56
|
Drive in use.
|
57
|
Reached maximum physical size.
|
58
|
Reached maximum count of virtual disks.
|
59
|
There is not enough free space on the array disk(s)
to allow the operation to complete; the size of the virtual disk is
too large; or communication to the array disk(s) has been lost.
|
60
|
Limit your array disk selection to those disks already
included in another single virtual disk or to those array disks that
are not used at all by another virtual disk.
|
61
|
Invalid Parameter
|
62
|
Failed drive cannot be added.
|
63
|
The controller cannot support the number of array disks
that you have selected. Choose a smaller number.
|
64
|
Delete virtual disk failed. Controller busy.
|
65
|
Delete virtual disk failed.
|
66
|
Create virtual disk failed.
|
67
|
Create virtual disk failed. Controller busy.
|
68
|
Create virtual disk failed. Failed to map virtual disk
to operating system disk.
|
69
|
Create virtual disk failed. Failed to map virtual disk
to operating system disk.
|
70
|
Virtual disk initialization failed.
|
71
|
Virtual disk initialization failed. Controller busy.
|
72
|
Virtual disk reconstruction failed. Controller busy.
|
73
|
Virtual disk resynching failed. Controller busy.
|
74
|
Flush Virtual disk's cache failed on controller.
|
75
|
Virtual disk partition specified not found.
|
76
|
Unsupported cache policy value.
|
77
|
Unsupported write policy value.
|
78
|
Unsupported read policy value.
|
79
|
Cancel initialization on virtual disk failed.
|
80
|
Cancel reconstruction on virtual disk failed.
|
81
|
Cancel resynchronization on virtual disk failed.
|
82
|
The maximum number of virtual disks that can be created
has been reached.
|
83
|
The new virtual disk must use only the remaining free
space on the array disks used in the last virtual disk you created.
Select all array disks that are used in the last virtual disk you
created.
|
84
|
You have selected an array disk that is in a degraded
or failed state. Choose another array disk.
|
85
|
Delete the last created virtual disk first.
|
86
|
Virtual disk initialized for use and no override requested.
|
87
|
Virtual disk type requested is invalid for the attempted
operation.
|
88
|
Virtual disk Move operation failed. Cannot rename,
virtual disk is already in use.
|
89
|
Failover invalid.
|
90
|
Virtual disk resynching.
|
91
|
Virtual disk resynch failed.
|
92
|
Virtual disk reconstruct failed.
|
93
|
Cannot format a virtual disk that contains a boot or
system partition.
|
94
|
Cannot initialize a virtual disk that contains a boot
or system partition.
|
95
|
Virtual disk Copy failed.
|
96
|
Virtual disk mirror set required.
|
97
|
Virtual disk Create - Read-only failed.
|
98
|
Virtual disk Create - Read-write failed.
|
99
|
Virtual disk - Clear-to-zero failed.
|
100
|
Virtual Disk Requires Non Multilevel.
|
101
|
Virtual Disk Promote Operation failed.
|
102
|
Specified virtual disk has no drive letter assigned
to it.
|
103
|
Cannot expose virtual disk.
|
104
|
Cannot reconfigure virtual disk.
|
105
|
Cannot stop the reconfiguration of the virtual disk.
|
106
|
SMART report count not supported.
|
107
|
Operations on hidden virtual disks are not allowed.
|
108
|
Virtual disk is in use.
|
109
|
The virtual disk is in use. It cannot be reconfigured
at this time.
|
110
|
Virtual disk operation is temporarily unavailable.
Initialization in progress.
|
111
|
Virtual disk operation is temporarily unavailable.
Reconstruction in progress.
|
112
|
Virtual disk operation is temporarily unavailable.
Rebuild in progress.
|
113
|
Virtual disk operation is temporarily unavailable.
Check consistency in progress.
|
114
|
Specified virtual disk too small.
|
115
|
Virtual disk operation not supported. Size too small.
|
116
|
Operation is temporarily unavailable. Space in use.
|
117
|
Cannot reconfigure to the given RAID level.
|
118
|
Cannot reconfigure from current RAID level to the given
RAID level.
|
119
|
One of the array disks selected for the virtual disk
is already in use.
|
120
|
Virtual disk operation not supported. Cannot use non-RAID
disk.
|
121
|
Controller Read Configuration failed.
|
122
|
Controller Write Configuration failed.
|
123
|
Controller cache flush failed.
|
124
|
Enable alarm on controller failed.
|
125
|
Disable alarm on controller failed.
|
126
|
Quiet alarm on controller failed.
|
127
|
Controller failed to perform the task.
|
128
|
Specified bus not found for controller.
|
129
|
Call to set cache mode on the controller failed.
|
130
|
Unexpected controller error.
|
131
|
Controller out of memory.
|
132
|
Invalid controller state.
|
133
|
Controller failed.
|
134
|
Controller busy.
|
135
|
Controller does not exist.
|
136
|
Controller name is invalid.
|
137
|
Controller is iterated.
|
138
|
Rename of virtual disk was not successful.
|
139
|
The controller was not able to erase the file system
from the specified virtual disk.
|
140
|
The controller was not able to add space to the specified
concatenation set.
|
141
|
The controller was not able to get the status of the
specified mirror set.
|
142
|
The controller was not able to set the requested failover
space.
|
143
|
The controller cannot get the failover space information.
|
144
|
Controller cannot unmirror the specified virtual disk.
|
145
|
The controller could not split the specified virtual
disk.
|
146
|
The controller could not lock the specified virtual
disk.
|
147
|
Controller IO paused.
|
148
|
No controller parameter support.
|
149
|
Controller does not recognize parameter symbol.
|
150
|
Controller Battery Recondition failed.
|
151
|
Controller Get disk signature failed.
|
152
|
Controller Read Flags failed.
|
153
|
Controller Set Flags failed.
|
154
|
Controller Remove Snap Shot failed.
|
155
|
Controller not supported.
|
156
|
Controller device initialization failure.
|
157
|
Partner controller already opened readwrite.
|
158
|
No partner controller found.
|
159
|
The virtual disk is not valid for requested operation.
|
160
|
Cannot communicate with controller.
|
161
|
Set operation failed.
|
162
|
Operation to update error count of SMART device has
failed.
|
163
|
Operation to clear error count of SMART device has
failed.
|
164
|
Driver could not execute.
|
165
|
Cannot delete virtual disk.
|
166
|
Cannot set temperature probe. Invalid value entered.
|
167
|
Cannot set enclosure tag. Invalid value entered.
|
168
|
Cannot set enclosure alarm.
|
169
|
Temperature probe value out of range.
|
170
|
Cannot set cache mode.
|
172
|
Data will be lost on the secondary disk and a reboot
will be forced.
|
173
|
Cluster Services (MSCS) is running. Deleting a virtual
disk that contains a cluster resource can result in unpredictable
errors or system hangs (quorum disk). You should shut down cluster
services before deleting cluster resources. Are you sure you want
to proceed?
|
174
|
Cannot perform Create Virtual Disk or Delete Virtual
Disk while the other server in a cluster is online. Please shut one
of the servers down and retry the operation.
|
176
|
Invalid array disks or failover drives selected for
reconfigure/create operation. Please make sure that all array disks
and failover drives associated with the virtual disk are selected.
|
177
|
The maximum number of partitions have already been
created on one of the selected array disk(s). Each array disk can
hold portions (partitions) of up to 10 virtual disks. This virtual
disk cannot be created because one or more array disk(s) have reached
the partition limit.
|
178
|
The virtual disk is in use. Please close any applications
that use the virtual disk and unmount any file systems that reside
on the virtual disk.
|
179
|
The firmware version is not supported. Please update
the firmware from http://support.dell.com.
|
180
|
The specified device does not have enough free space
to be used as failover space for the specified virtual disk.
|
181
|
The operation failed. Please rescan the controller
and retry the operation.
|
182
|
The operation cannot be performed while a task is running
on the specified virtual disk.
|
183
|
The specified virtual disk has no dead disk segments.
|
184
|
The operation cannot be performed at this time. The
firmware can recondition a battery that has a Degraded or Power Low
state. The firmware will not recondition a battery that is functioning
normally or that has a Ready, Failed or Missing state.
|
185
|
The version of the controller firmware installed on
your system does not support this operation.
|
186
|
There are no disks of the correct type available to
be assigned as a hot spare.
|
187
|
There are no disks of sufficient size available to
be assigned as a hot spare.
|
188
|
There are no disks of the correct type and sufficient
size available to be assigned as a hot spare.
|
189
|
The Create Virtual Disk task was successful but the
operating system may not be aware of the new virtual disk.
|
191
|
The import of foreign configurations is complete. Some
configurations could not be imported.
|
192
|
Enable alarm command failed. The enclosure processor
is busy or a firmware download is in progress.
|
193
|
Disable alarm command failed. The enclosure processor
is busy or a firmware download is in progress.
|
194
|
Quiet alarm command failed. The enclosure processor
is busy or a firmware download is in progress.
|
195
|
An error occurred while resetting a temperature probe.
|
200
|
No array disks found!
|
201
|
Invalid Virtual Disk ID!
|
202
|
RAID Type & Size are required to create a virtual
disk. Ensure that the RAID type and the size are correct.
|
203
|
Invalid Environment command!
|
204
|
File is not writable!
|
205
|
Setting Environment Variable Command failed!
|
206
|
Filename is not provided!
|
207
|
Invalid Strict option! Please provide a valid number
between 1 and 100.
|
208
|
Span depth is not needed for this RAID type.
|
209
|
Array disk(s) cannot be part of virtual disk(s) and
also be hotspares.
|
210
|
Cannot have silent and logfile switch with the same
command.
|
211
|
Invalid array disk(s)!
|
212
|
Invalid failover disk(s)!
|
213
|
Creation of a virtual disk on this RAID controller
requires the use of the entire disk space of the array disks. The
size or - sz parameter is not needed.
|
214
|
Invalid size given! size=max or -sz=max is not supported
for this RAID controller.
|
215
|
The value given for envname or -envn is null or too
long.
|
216
|
Invalid virtual disk size!
|
217
|
The strict option provided failed! Virtual disk is
not created.
|
218
|
Unable to determine optimum size for Virtual disk.
Ensure that the array disks are of the same protocol (i.e. SAS, SATA,
SCSI). If there is a mismatch of the array disks then the RAIDCFG
will not be able to determine the optimum size. In addition, also
ensure that there is drive size available for the specified virtual
disk.
|
219
|
One or more array disks selected to create virtual
disk or hotspare doesn't have enough disk space. Please make sure
that all the array disks and failover drives selected have enough
free space.
|
220
|
The number of array disks provided is incorrect for
the requested RAID Type! RAID 1 requires exactly 2 array disks, RAID
5 requires at least 3 array disks, RAID 10 requires at least 4 array
disks and RAID 50 requires at least 6 array disks.
|
221
|
No free array disks found!
|
222
|
No global failover disks found!
|
223
|
One or more array disks selected for the virtual disk
has foreign configuration.
|
224
|
Error in opening the file.
|
225
|
SAS 5/IR, SAS 6/IR, H200 and SW RAID requires atleast
two physical disks to create RAID 0 or RAID 1.
|
226
|
No Foreign configuration present in the controller.
|
227
|
The virtual disk cannot be created on the physical
disks you selected. Possible reasons include:unsupported mix of SAS
and SATA protocol type disks, unsupported mix of SSD and HDD media
disks.
|
228
|
Unsupported array disks selected for VD creation.
|
229
|
Setting stripe size is not supported in this controller.
|
230
|
Invalid VirtualDisk(VD) name specified. VD name can
have alphanumeric characters [A-Z,a-z,0-9,_,-] only. Also, VD name
size must be less than or equal to 15 characters
|
231
|
Error occurred while setting virtual disk as boot disk.
|
232
|
Error occurred while setting name for virtual disk.
|
233
|
Couldn't get boot virtual disk.
|
234
|
PCIe Link Speed could not be set for the RAID controller.
Please check if the controller has the capability to set/change its
PCIe link speed.
|
235
|
PCIe Link Speed can be set to either 2 or 3 i.e. PCIe
Generation 2.0 or 3.0.
|
236
|
PCIe Link Speed could not be retrieved for this RAID
controller.Please check if the controller has the PCIe link speed
capability.
|
237
|
Please reset the controller before doing any further
operation.
|