PilotMajor

updated

10 years ago

0

11832

August 15th, 2016 18:00

Aurora-R4, Windows 10, Command Center?

Hi, so I had some difficulties getting Windows 10 to work, and had to do a clean reinstall of the 10240 edition of Windows 10, and even then some of the apps refused to work. I tried to reinstall Command Center, but it was incompatible with Windows 10 and refused to install. 

I now have the Windows 10 Anniversary Edition Updated version 1607 14393.51 and everything that wasn't working is now working, except I do not have the Alienware Command Center installed.

I can't seem to find a Windows 10 compatible Command Center for the Aurora R4 in the Downloads section.

Assuming this means there isn't actually a Windows 10 compatible Alienware Command Center for desktops, do I have any options for reinstalling a working Alienware Command Center?

Thank you very much for any good advice.

  • DELL-Chris M

    Community Manager

    56891 Posts

    232143 Points

    9739

    0

    Posted August 16th, 2016 11:00

    Did you attempt to install the 3.6.5.0 A04 Windows 7/8.1 Command Center? Can you right click the file, click the Compatibility tab, choose Compatibility mode, then try to run it.


    DELL-Chris M (old account)

    #IWork4Dell

  • 9739

    0

    Posted August 17th, 2016 15:00

    Thanks Chris. It does indeed appear to work, and found my previous settings somewhere as well, which is surprising but hey, I lost some others I thought I had saved, so fair's fair.

    So I see there is also an Alienware Command Center 4.0 available for download as well. Would that have been an inappropriate choice?

  • DELL-Chris M

    Community Manager

    56891 Posts

    232143 Points

    9739

    0

    Posted August 17th, 2016 17:00

    Inappropriate, correct. The 4.0 and newer were not validated on the Aurora-R4.


    DELL-Chris M (old account)

    #IWork4Dell

  • Cass-Ole

    8 Professor

    1868 Posts

    9698 Points

    9739

    0

    Posted August 17th, 2016 21:00

    fx.PNG

    this is my R4 on CmndCntr 4.0

    I did not allow it to flash my MI/O board with the newer firmware (it was installed with MIO USB cable disconnected); long story short, stick to 3.6

    ALxFx.PNG

    this is my ALX on 4.0

    the remnants of Phobos | Deimos GUI is present but our MIOs are not up to the task

    3582.Capture3.PNG