Unsolved
This post is more than 5 years old
34 Posts
0
16284
Nvidia 3d setup?
I'm running a dual monitor system with a U2410 as the main (left) and an AW2310 as the secondary (right). The AW2310 is set at 1092 x 1080 and the refresh rate at 120 Hertz. When I run the Nvidia 3D Vision test tool everything passes except the monitor. Anyone have a similar setup working in 3D? Any suggestions..
morblore
2.4K Posts
0
October 10th, 2010 13:00
Do you mean 1920 x 1080? If not set it back up to that. When doing 3D I think you need to disable the other monitor since its not 3D and then bump the resolution back up on the Alienware monitor. Try that and see what happens.
schneiderman
34 Posts
0
October 10th, 2010 14:00
Yes, I meant 1920 x 1080. Sorry for the typo. I tried turning the first monitor off and that didn't work. I'll try physically disconnecting it from the card and rebooting.
schneiderman
34 Posts
0
October 11th, 2010 11:00
Well, I switched connections on the card and it now passes the test, Apparently, the left input on the card is the one that is tested, so when I put the AW monitor there all tests well.
morblore
2.4K Posts
0
October 12th, 2010 05:00
Cool:)