Unsolved
This post is more than 5 years old
66 Posts
0
3463
Thermal Controls on Command Center
My temperature and fan readings dont seem to vary much no matter what I am running on my Aurora R3. Also, does anyone know what the 3 sensor readings relate too? My temperatures are always in the 86F to 88F range. My fan speeds stay almost constant. I have it set to auto. Does this seem right or is my Command Center not functioning properly? Thanks.
Alienware-Luis_
200 Posts
0
July 19th, 2012 11:00
You can double check your temps with CPU-Z or HWinfo to make sure the Command Center is reporting correctly.
MG1959
66 Posts
0
July 19th, 2012 18:00
i checked the thermal readings on command center against those from aida64, and they were very different. Command center shows 84 to 86F, the aida 64 shows 100 to 110F. How do I recalibrate the command center thermal readings?
Alienware-Luis_
200 Posts
0
July 20th, 2012 09:00
Try Reinstalling the Command Center. That should do the trick :P