hello, do all alienware area 51 have small very very tiny metal bumps to the edges of the seams where there is a gap side where the two metal parts connect to form the handle? have attached arrows with what we are talking about.
Mine has no defects noted on it. While I will agree this is minor flaw in yours, you also have the right to complain and make use of your resources with Dell
could not upload on the forum because file size says is too big. here is link from my one drive First is bottom seam line bump and second is top seam line bump:
Yes, it means I am not a giant crybaby like you. I mean take a step back and consider what you are crying about. There are people with real problems here and you are taking peoples time with not even a real cosmetic concern. Manufactured parts have some small burrs, the fact that you would return it for that is freaking ridiculous and the fact that you framed you question as to whether or not is acceptable is even more stupid. What if ALL of them have the same nothing defect, would you accept it then? If thats the case why even complain about it at all?
LOL, is right. Hahahahaha
Edit, I dont know how you missed the other more obvious defect in the machine if you noticed to tiny bumps.
W8lifts
124 Posts
0
March 13th, 2016 04:00
Mine has no defects noted on it. While I will agree this is minor flaw in yours, you also have the right to complain and make use of your resources with Dell
W8lifts
124 Posts
0
March 13th, 2016 10:00
JUST DUSTY, No Bumps
Alienware - Rodrigo
7 Technologist
7 Technologist
•
4.4K Posts
1
March 11th, 2016 13:00
Hi,
Try posting a more zoomed in picture that shows the bumps that you are referring to.
john-kimball44
169 Posts
0
March 11th, 2016 14:00
here it is my friend
could not upload on the forum because file size says is too big. here is link from my one drive First is bottom seam line bump and second is top seam line bump:
john-kimball44
169 Posts
0
March 11th, 2016 14:00
beastmd1
37 Posts
1
March 12th, 2016 09:00
Wow. They are so small and unimportant. If that's your problem you may need to examine your life.
john-kimball44
169 Posts
0
March 12th, 2016 10:00
?
john-kimball44
169 Posts
0
March 12th, 2016 10:00
Have they all got it ? a manufacturing thing ?
john-kimball44
169 Posts
0
March 12th, 2016 13:00
take your own advice first then stop and think before posting a reply
beastmd1
37 Posts
0
March 12th, 2016 14:00
Yeah I am not the one here bitching about 2 little almost invisible bumps on a mass manufactured case.
beastmd1
37 Posts
0
March 12th, 2016 14:00
Yes, it means I am not a giant crybaby like you. I mean take a step back and consider what you are crying about. There are people with real problems here and you are taking peoples time with not even a real cosmetic concern. Manufactured parts have some small burrs, the fact that you would return it for that is freaking ridiculous and the fact that you framed you question as to whether or not is acceptable is even more stupid. What if ALL of them have the same nothing defect, would you accept it then? If thats the case why even complain about it at all?
LOL, is right. Hahahahaha
Edit, I dont know how you missed the other more obvious defect in the machine if you noticed to tiny bumps.
john-kimball44
169 Posts
0
March 12th, 2016 14:00
of course not ;)
we all know what the md really stands for
lol
john-kimball44
169 Posts
0
March 12th, 2016 15:00
lol
john-kimball44
169 Posts
0
March 12th, 2016 15:00
if you don't know then don't be an unhelpful chimney and wasting peoples time.
ppl actually bought the system unlike MD1's
beastmd1
37 Posts
0
March 12th, 2016 15:00
The fact is I do know and no those two little bumps arent on every one. I hope you send it back and the next one has 3 bumps. What a goof...