Unsolved
This post is more than 5 years old
5 Posts
0
1063
Backup of ESX-Server V4.0 with Avamar v5.0.2.41
Sorry I'm new in the business and therefore need some support:
we've recently upgraded our ESX-hosts from 3.5 to 4.0 (Avamar upgrade to v5.0.2.41 has been done earlier). Now I wonder how to backup them because I didn't found an agent.
For vms I've downloaded the latest proxy-appliance. Does this appliance really need a san view? This wouldn't work in my case because I cannot present LUNs to vms.
How can I backup my ESX4.0 hosts?
How can I backup my vms (without a proxy)?
Any suggestions are highly welcome
Hormigo
131 Posts
0
September 27th, 2010 12:00
Hi,
For you to make backups of VMDKs, is necessary Avamar Proxy.
Avamar Proxy must reside on an ESX Host that contains the mapping LUNs, regarding the Virtual Machines that you want to perform backups.
EX: VM_A = LUN12 = ESX3
Avamar proxy should reside in ESX3 and its properties, map the LUN12.
You said that no SAN. Where are stored the VMDKs? The local disk?
Check the Prerequisites for a backup VMDK by VADP.
You can make backup by Guest Level, installing the agent on each client.
Regards,
Hormigo
fis-ch
5 Posts
0
September 29th, 2010 01:00
Hi,
what I meant: the Avamar proxy itself hasn't any access to the SAN
because it hasn't a HBA. VMDKs are stored on SAN of course.
You wrote "Avamar Proxy must reside on an ESX Host that contains the
mapping LUNs" - does this mean the proxy is only capable of backing up
the VMs residing on the same ESX-host (we've two of them on every site)?
Kind regards
Emanuel
jxtliG76io12459
25 Posts
0
September 29th, 2010 23:00
Hi,
the backup proxy itself should be a VM on one ESX server which has the access to SAN so it will be able to backup VMs there.
You could refer to 'Avamar for VMware Guide 5.0'.
Thanks.
fis-ch
5 Posts
0
October 5th, 2010 06:00
Hi,
after inviting proxy client and acknowledging the message that
invitation has been sent, the proxy client stays unactivated without any
message. I guess, that's the reason for "Failed to initiate a backup or
restore for a virtual machine because no proxy was found to service the
virtual machine" on trying to do a backup?
how can I check state of proxy activation?
Kind regards
Hormigo
131 Posts
0
October 5th, 2010 07:00
Hi,
In Administration, Click Right on Avamar Proxy – Properties.
Set all Luns.
Test backup again.
Regards,
Hormigo
De: fis-ch
Enviada em: terça-feira, 5 de outubro de 2010 10:58
Para: Fábio Hormigo
Assunto: New message: "Backup of ESX-Server V4.0 with Avamar v5.0.2.41"
EMC Community Network
Backup of ESX-Server V4.0 with Avamar v5.0.2.41
reply from fis-ch in Avamar - View the full discussion