Unsolved
This post is more than 5 years old
14 Posts
0
3720
Connect to Avamar Console with NAT
I can connect to avamar with Avamar Console.
Our Avamar have a Private IP.
We was open one public IP, for do NAT to Avamar.
When I try connect to publivc Ip, I get this error:
com.avamar.asn.NetworkException: Unable to connect to a login server
The ports is open for my Ip, The traffic in port 7778 is enable and work fine.
Can Avamar work with NAT for Conosole?
Our Avamar have a Private IP.
We was open one public IP, for do NAT to Avamar.
When I try connect to publivc Ip, I get this error:
com.avamar.asn.NetworkException: Unable to connect to a login server
The ports is open for my Ip, The traffic in port 7778 is enable and work fine.
Can Avamar work with NAT for Conosole?
Goran1
13 Posts
0
February 3rd, 2009 14:00
avetour
14 Posts
0
February 4th, 2009 02:00
I have done something test and I get a conclude.
I think that in protocol 7778 does any kind of validation with IP.
II managed to connect to Avamar Administrator through public IP, but
cheating the system. I explained:
In our system, I connect to private IP, but our firewall does NAT to Public IP of Avamar system.
In this case, I connect to avamar without problem.
In avamar when you configure the IP, you can configure the external IP. I think thats this Ip is for does NAT.
The questions is: Why Avamar don permit connect to public IP?
We are interested in opening the administrator console to our clients through a validation that open the necessary ports.
Olo1
11 Posts
0
October 26th, 2009 05:00
ttavares
1 Message
0
January 29th, 2010 15:00
rob_steele
120 Posts
0
May 28th, 2010 07:00
This problem is usually caused by DNS.
Avamar 5.0 relies heavily on DNS and therefore special care should go into setting up DNS properly.
If you are using windows AD for DNS, then make sure that DNS records are setup in the same domain as the domain that Avamar was setup in. If they are and still having this issue, remove duplicate avamar records from subdomains. This should resolve your issue.
If the DNS server is unix/linux based case sensitivity is usually the culperate.
rob_steele
120 Posts
0
June 4th, 2010 06:00
The hotfix works... but I think just disabled some of the DNS features / checks.
duliang
3 Posts
0
June 4th, 2010 06:00
ttavares wrote: "I also receive the following error : com.avamar.asn.NetworkException: Unable to connect to a login server when trying to log on to the Avamar Administrator (v5.0) via VPN tunnel. This is a single node v5 system. Has anyone received a resolution to this issue? "
-------------------------------------------------------------------
if your Avamar version is 5.0 SP1 or earlier, and you are trying to launch the Avamar Administrator for an Avamar server with NAT IP, you may have encountered a bug. ( 18726 )
I had that issue, and with a hotfix from Avamar website, it is solved. the detail
duliang
3 Posts
0
June 4th, 2010 10:00
yes hotfix works OK for v5sp1, it just no longer available for download from avamar ftp site from today.
just a bit off topic, regarding DNS:
1) indeed DNS can be sometimes an extra layer of problem... In my previous backup deployment, including Avamar, always try avoid using DNS or other name services, instead just use plain hosts file.
2) plain hosts file are ok for most Server backup environments.
3) and with Avamar now supporting DTLT, it is almost impossible to avoid DNS for DTLT clients, that could be the the risk of a lot trouble because DNS is not normally managed by backup team, it is a potential risk if someone causually change DNS entries