Unsolved
This post is more than 5 years old
31 Posts
0
464
AX4-5 Expansion Issues
We've added the last DAE on our AX4-5.
It contains (12) 1TB drives and we are at our max of 60 Drives.
The hardware was installed and the system picked up the NEW DAE and all (12) 1 TB drives.
They all show up as unbound.
I try to configure a NEW Raid Group and it states:
"Not enough Disks"
I choose the drives via the "manual" method but I can't drop down the RAID Type, It's grayed out.
Doesn't allow the creation of the NEW raid group.
THOUGHTS?
kelleg
4.5K Posts
0
December 20th, 2013 14:00
Are you using Navisphere Express or Full Navisphere?
Can you select one of the disks and select the properties and see the Properties?
You could try rebooting the Storage Processors one at a time to see if that clears up the problem.
glen