Unsolved
This post is more than 5 years old
22 Posts
0
938
AX4-5i DAE Addition
I just added a new shelf of 2 TB disks to my AX4-5i. The DAE showed up fine in Navi Manager and was recognized fine as the fourth DAE on the array, but all the disks are showing as value = 0 with the DAE itself showing Faulted. When I look at disk summary it states Enclosure 4 Disk 0-11 with a STATE Requested Bypass and Raw and User capacity as 0. Any thoughts?
Regards,
Erik
avs
91 Posts
1
May 18th, 2011 11:00
Hello
2Tb HDD requires FLARE ver. 02.23.050.5.707 or later
You also need ExpansionTier Enabler to add new DAE
Make sure your clariion box meets this requirements
Best regards,
Alex