Unsolved
This post is more than 5 years old
4 Posts
0
897
CX-300
We have a CX-300 in a DR site and recently we were given an old CX3-40 (that has issues) but has 7 DAE's. The DAE's are Model CX-4PDAE and they contain 146 GB (2 full DAE's)-500 GB (5 full DAE's) Drives. Can I use these DAE's with the CX-300? It only has 1 DAE with 300 GB drives attached now and adding 2 additional DAE's of storage would be great. I would like to use the 500 GB drives and max the CX-300 out.
dynamox
1 Rookie
1 Rookie
•
20.4K Posts
1
July 15th, 2013 18:00
take a look at this document
https://support.emc.com/docu42949_All-VNX-CLARiiON-Celerra-Storage-System-Disk-and-FLARE-OE-Matrices.pdf?language=en_US
Vipin VK
812 Posts
0
July 15th, 2013 22:00
DAE4P is not supported with CX300. For disk compatibility (if you have any free slots to insert them) you may check the Part Number and verify the same in the Disk and FLARE OE matrices shared by Dynamox.
Array Model Type / DAE Type
CX200/400/600
CX300/500/700
CX3-10/3-20/
3-40/3-80
CX4-120/4-240/
4-480/4-960
DAE3P (DAE4P)
NO
NO
YES
YES
nfnhf65
6 Posts
0
December 2nd, 2014 03:00
How can i know if my KTN-STL4 use DAE2P or DAE3P ?
Roger_Wu
4K Posts
0
December 2nd, 2014 17:00
I found the picture on ebay, CX-4PDAE is DAE4P,
kelleg
4.5K Posts
0
December 9th, 2014 14:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen