Unsolved
This post is more than 5 years old
2 Posts
0
2485
CX-40, how to access and view drives
Good day
I received CX-40 with FC storage arrays, i need to access the drives to do data sanitization but have no clue how to access it.
Please assist me.
umichklewis
1.2K Posts
0
January 13th, 2016 11:00
You can engage an EMC partner to perform the disk sanitation activity for you. Otherwise, you'll have to decide which method you wish to use. Unlike the VMAX or newer VNX arrays, the CX-40 does not have a native method to perform a DOD wipe. Depending on your requirements, could simply create a massive LUN, write data to it, then destroy it, but it depends on how stringent you must be for your requirements.
Let us know if that helps!
jithin_c_v
16 Posts
0
January 13th, 2016 20:00
Read here for EMC Certified Data Erasure Services : http://www.emc.com/collateral/services/consulting/h1321-certified-data-erasure-serv-ss.pdf
For CLARiiON, read here : http://www.emc.com/collateral/hardware/service-overview/h5572-emc-cert-data-erasure-clariion.pdf
You may can find different tools and methods for the same with 3rd party tools through googleing, but if possible use the EMC Certified methods.
Another way is you can do the zeroing for each single disk with the below mentioned naviseccli command,
naviseccli -h zerodisk -messner start
For checking the status,
naviseccli -h zerodisk -messner status
Eg: naviseccli -h 10.192.11.221 zerodisk -messner 1_10 start
ryan8
2 Posts
0
January 13th, 2016 22:00
Hi
Thanks for reply.
I have to provide sanitization certificates for the sanitization performed.
I am struggling to access the management module too.
Do you have a list of EMC partners in the Johannesburg, South Africa region?
regards
2 Attachments
122865RSImage.jpeg
RSImage.jpeg
jithin_c_v
16 Posts
0
January 13th, 2016 22:00
If you want the certificate, then contact EMC.
You can find the partner details for your location from here : http://www.emc.com/partners/partner-finder/search.htm
Thanks,
Jithin C V