Unsolved
This post is more than 5 years old
232 Posts
0
2899
CX3-10 cannot boot
Hi,
We have a CX3-10 never used which cannot boot
(both SP fault LEDs are blinking, changing speed
from time to time)
I have been told to disconnect all the eclosures
except the firts one and to remove the SPB and
power up again, No way it's exactly the same
thing.
Did anyone encounter the problem ? What could
be the solution ?
Thanks
Consty
We have a CX3-10 never used which cannot boot
(both SP fault LEDs are blinking, changing speed
from time to time)
I have been told to disconnect all the eclosures
except the firts one and to remove the SPB and
power up again, No way it's exactly the same
thing.
Did anyone encounter the problem ? What could
be the solution ?
Thanks
Consty
kelleg
4.5K Posts
0
January 16th, 2009 07:00
glen
0W3iz4grQi11770
1 Message
0
January 6th, 2011 18:00
I have the same problem I can not boot SPA and SPB has.
It will remain on step.
int13 - READ PARAMETERS (1630).
int13 - CHECK EXTENSIONS PRESENT (1631).
int13 - GET DRIVE PARAMETERS (Extended) (1632).
kelleg
4.5K Posts
0
January 7th, 2011 10:00
Please contact EMC support and open a service request for this - this is probably too complicated for a forum.
glen
Anonymous User
1 Message
0
June 6th, 2018 20:00
how can you solve ?
kelleg
4.5K Posts
0
June 7th, 2018 12:00
This thread is 7 years old. I would recommend that you create a new topic and provide the details of what your problem is:
Issue - what is the exact issue
Array - what array type and what is the current Flare code version
glen