This post is more than 5 years old
77 Posts
0
1342
CX3-10c Hot Spare
Dear,
I have created 2 RAID Group Type Hot Spare with 2 disks in it as below.
1) Do I need to bind a LUN to activate it?
2) When i use the navsecli getdisk to display the disk, the hot spare disk Hot Spare: state is shown as unbound, is it normal? (For another model VNX 5100, it's shown as Hot Spare Ready.
Roger_Wu
2 Intern
2 Intern
•
4K Posts
0
October 30th, 2013 21:00
For CX3, you need to bind a LUN on each hot spare RG to activeate them. You can follow the steps in Navisphere's help manual:
"An unbound RAID Group component for the new RAID Group appears in the storage tree under the RAID Group component. You now need to bind a LUN on each HOT Spare RAID Group to activate them."
You don't need to activate hotspare RGs on CX4 and later.
Ed La
77 Posts
0
October 31st, 2013 00:00
does it mean binding a new LUN to it will have it activated for automatically replacing defected disk?
Roger_Wu
2 Intern
2 Intern
•
4K Posts
0
October 31st, 2013 00:00
Yes. And you can always click on the help button in Navisphere to search for the instructions:
Ed La
77 Posts
0
October 31st, 2013 00:00
Thank you, actually my Navisphere EMC Navisphere Manager 6.24.2.5.0 is different and that's why I can't find it:-
There is no Creating a Hot Spare item there.