This post is more than 5 years old
2 Posts
0
1051
CX4-120 number of available back-end buses
Hello All,
I would like to raise a question about number of BUSes on CX4-120, I've found two documents at support.emc.com where one says that theres is one BUS, and second doc says that there are two BUS for DAEs.
Which one tells the truth?
Cheers,
Piotr
sylvain-20x4-
35 Posts
0
February 27th, 2014 02:00
Hello Piotr,
CX4-120 has only 1 Backend Bus.
It's 2 BE ports per array , 1 per SP.
Can you please point what document state otherwise so it can be corrected ?
Thanks,
berentp
2 Posts
0
February 27th, 2014 03:00
Hi Sylvian,
Here you are:
http://www.emc.com/collateral/hardware/white-papers/h5534-intro-clariion-cx4-series-ultraflex-tech-wp.pdf
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/public/CLARiiON_All_Models/FAQs/cX4_cx3_bus_speeds.htm
sylvain-20x4-
35 Posts
1
February 27th, 2014 04:00
Thanks,
The 1st document has the correct information.
The link seems down for the 2nd document, but google cached page confirms the information is not accurate in this document.
Hopefully it's been removed from the website.
Product support bulletin (PSB) and Hardware guide are the go-to docs to get the most accurate and up-to-date informations.