This post is more than 5 years old
13 Posts
0
1465
Having trouble creating a new initiator
Let's see what silliness I am forgetting to do now... In a nutshell, I am going through the "Create Initiator Record" dialog and I have what I believe to be correct entries in place:
Initiator Name: VMware 1
SP-Port: A-4
Initiator Type: Clariion Open
ArrayCommPath: checked
Unit Serial Number: Array
Failover mode: 1
Vendor: QLogic
Model:QLA2462
New Host: checked
Hostname:uussth01vhcp011
IP address: 172.24.4.101
With all this data set, the OK button is grayed out. What am I doing wrong here? This is on a CX3-40c
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 20th, 2013 11:00
Oops nodewwwn:portwwn
etaljic81
1K Posts
0
February 20th, 2013 11:00
Can you post a screenshot?
rongage2
13 Posts
0
February 20th, 2013 11:00
Reason for manually creating: pre-seeding the entry on the SAN
WWP/WWN - no place in that dialog to put this information - that I can see
rongage2
13 Posts
0
February 20th, 2013 11:00
I guess I misread the help screen for that window.
Initiator Name User-defined name for the HBA initiator
Thanks everyone for helping out!
etaljic81
1K Posts
1
February 20th, 2013 11:00
Init name is wrong and that's why the OK is grayed out. WWNN:WWPN of the HBA
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 20th, 2013 11:00
Initiator name should be port wwn:nodewwn
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
February 20th, 2013 11:00
Is there a reason you are creating it manually ? Did you specify node:port wwn
rongage2
13 Posts
0
February 20th, 2013 11:00
The forum software is not accepting the jpg image upload - trying method b:
Vipin VK
812 Posts
0
February 20th, 2013 11:00
HBA WWN :