This post is more than 5 years old
26 Posts
0
1519
Host Initiator configuration
Does anyone know where I can find a document that defines the initiator settings for hosts on a CX3? I am mostly interested in RHEL w/ powerpath.
This post is more than 5 years old
26 Posts
0
1519
Top
SANDoozer
39 Posts
0
March 19th, 2009 12:00
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/live1/en_US/Offering_Technical/Technical_Documentation/069001166.pdf
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
March 19th, 2009 11:00
Home > Support > Product and Diagnostic Tools > CLARiiON Tools > CLARiiON Procedure Generators
SANDoozer
39 Posts
0
March 19th, 2009 11:00
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/live1/en_US/Offering_Technical/Technical_Documentation/300-003-511.pdf
It states that the specific host settings are found in this document, The Installation Roadmap for Clariion Storage Systems:
https://powerlink.emc.com/nsepn/webapps/btg548664833igtcuup4826/km/live1/en_US/Offering_Technical/Technical_Documentation/069001166.pdf
Hope this helps.
Message was edited by:
SANDoozer
cosse
26 Posts
0
March 19th, 2009 11:00
SANDoozer
39 Posts
0
March 19th, 2009 11:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
March 19th, 2009 11:00
Home > Support > Technical Documentation and Advisories > Host Connectivity/HBAs > Installation/Configuration
EMC Host Connectivity Guide for Linux
cosse
26 Posts
0
March 19th, 2009 12:00
Of course, I can't find that anywhere...
cosse
26 Posts
0
March 19th, 2009 12:00
Thanks for all the responses.
kelleg
4.5K Posts
0
March 19th, 2009 15:00
http://knowledgebase.emc.com/emcice/documentDisplay.do?docType=1006&clusterName=DefaultCluster&resultType=5002&groupId=1&page=&docProp=$solution_id&docPropValue=emc99467&passedTitle=null
glen
GearoidG
251 Posts
0
April 4th, 2009 05:00
See http://emc.com/cx3support and http://emc.com/cx4support
Gearoid
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
April 4th, 2009 06:00