Unsolved
This post is more than 5 years old
2 Posts
1
1880
How to access the CX-4PDAE-DE drives
I have purchased a CX-4PDAE-DE with drives, BE1 cable and a Brocade 200e SAN switch on eBay. After connecting all the components the 200e reports a flashing green light for the CX-4PDAE. I logged into the 200e and discovered the recognized the port as a 'loopback'. No drives are detected. The lights on the installed drives themselves show up as green and seem to be working. Is there something I am missing? Any help would be appreciated. I have included pictures.
Roger_Wu
2 Intern
2 Intern
•
4K Posts
1
March 16th, 2014 20:00
You need to purchase an additional SPE (Storage Processor Enclosure) from eBay to make sure that this CLARiiON can work normally.
Once you get the SPE, you also need to make sure the first five disks in your DAE contain the correct FLARE image to boot the system. You can refer to the following threads for some information:
https://community.emc.com/thread/180386
https://community.emc.com/thread/180185
https://community.emc.com/thread/186046
Anyway it's not easy to let it work normally.
akutra
2 Posts
0
March 16th, 2014 20:00
Really? That is the only way to connect it to my SAN switch?
Previously, I connected them to a backplane (different drives) / T-card and the Switch (200e)... that was all I needed. For some reason I thought this was more convenient, I guess not. I may go back to the backplane option. Thanks anyway.