This post is more than 5 years old
7 Posts
1
4559
How to view system configuration in USM
Hi all!
What do I doing wrong with USM, when reseive
============================
The file selected does not appears to be a valid storage system configuration XML or SPCollect ZIP file.
Select another file.
===========================
I capturing diagnostics data, getting files
"20110919_141851.cap_CKxxxxxxxxx_11-09-19_14-18-49.xml"
"20110919_141851.clariion_DiagnosticData_CKxxxxxxxx_09-19-2011_14-14-57.zip"
but, cannot view nothing.
I have CLARiiON CX3-10c version:3.26.010.5.32
kelleg
4.5K Posts
1
September 19th, 2011 07:00
Flare Version 26 does not produce the arrayconfig.xml file you need for USM to work. USM is for the CX and flare 28 and higher.
See Knowledgebase article emc257752
glen
Greeka1
7 Posts
0
September 19th, 2011 07:00
How I can get this Knowledgebase article?
Elcade
52 Posts
1
September 19th, 2011 08:00
Once you log in to Powerlink, in the top left textbox that reads "Search the Knowledgebase", type emc257752 and hit enter; it will take you to the document that Glen Kelley mentioned above.
Manu.
Elcade
52 Posts
0
September 19th, 2011 08:00
Hello Greeka,
Do you have an EMC Powerlink account?
Manu.
Greeka1
7 Posts
0
September 19th, 2011 08:00
Yes, I have one
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
September 19th, 2011 23:00
USM cannot be used to open the configuration XML generated by CAP. Instead, it can open a SPCollect zip file, or configuration XML file captured by CLI or USM itself.
Greeka1
7 Posts
0
September 19th, 2011 23:00
Dont worked at all.
Error is the same.
========================================
The file selected does not appears to be a valid storage system configuration XML or SPCollect ZIP file.
Select another file.
========================================
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
1
September 20th, 2011 00:00
What's the eror message you got? What's the USM revision and the array version?
You should be able to find most answers from http://www.emc.com/partners/capeolinfo
Greeka1
7 Posts
0
September 20th, 2011 00:00
I captured configuration by USM itself just now. And tried open it to view configuration. But got this error.
And I cannot view configuration choosing options Generate too.
Tell me, how to view system configuration offline?
Swapnil_Pandey
86 Posts
0
October 24th, 2014 04:00
Hi,
I know this post is very old and i am not sure i will get a response but i wanted to give a try.
I have Flare 30 Clariion for a customer and i generated there configuration report several times earlier for two Clariion CX4 120, today i am getting the same error for one of the Clariion for both SP collects and one SP collect at the other storage not sure why.
Can you please suggest if you have any idea on this.....
kelleg
4.5K Posts
0
October 24th, 2014 06:00
It would be helpful if you described the error or posted the error message. Also, what version of USM are you using?
glen
Swapnil_Pandey
86 Posts
0
October 24th, 2014 09:00
Hi
Thanks for your response. The error message is same.
The file selected does not appears to be a valid storage system
configuration XML or SPCollect ZIP file.
I think the only thing change is i upgraded my USM version. Can that cause
any issue?
USM version is 1.3.3.1
Thanks for your reply again…
From: glen
Sent: Friday, October 24, 2014 4:30 PM
To: Swapnil_Pandey
Subject: Re: - How to view system configuration
in USM
ECN
How to view system configuration in USM
reply from glen
in *CLARiiON
Support Forum* - View the full discussion