Unsolved
This post is more than 5 years old
2 Intern
•
614 Posts
0
476
January 14th, 2011 11:00
ISCSI issue after cisco IOS upgrade
Hello,
We have ISCSI hyper-V hosts connected to our clariion cx4-480. I am not familiar with ISCSI connectivity to EMC devices to please bear with me on this. We did an IOS upgrade on our Cisco core and edge switches last thursday(A Fabric), this thursday (B fabric). After this thursday, one of the ISCSI initiators lost connectivity and not be reconnected through the connectivity status panel using Navisphere and it shows not logged in. Any thoughts or insight would be helpful.
Thanks in advance!
admingirl
No Events found!
admingirl
2 Intern
•
614 Posts
0
January 14th, 2011 11:00
In the switch panel I am seeing link down for the iscsi initiator.
dynamox
11 Legend
•
20.4K Posts
•
87.4K Points
0
January 15th, 2011 21:00
are you using software initiator or TOE card ?
kelleg
6 Operator
•
4.5K Posts
0
January 17th, 2011 21:00
The initiator is the NIC on the host, I would suggest rebooting the host and see if the NIC comes back up.
glen