This post is more than 5 years old
31 Posts
0
1161
PP shows clariion unmanged after reboot
- After pp upgrade from 5.3 to 5.5 the luns are missing from Solaris host. It’s a Solaris 10 machine.
- After reboot the powermt display options shows clarion unmanaged.
- How it went to unmanaged state after the reboot ?
- Every time we do a patching and reboot the clarion state is moved to unmanged. Why ?
- To resolve this each time after reboot we need to set the clarion to manage state and configure and save pp .
Madhug1
127 Posts
1
February 12th, 2013 05:00
Hi,
This seems to be issue with Powerpath configurations not from CLARiiON end.
If you are seeing CLARiiON LUNs are unmanaged from powerpath, Refer KB emc307677 from EMC Support site.
If you still have issue, request you to open a Service Request with EMC or chat by selecting the option,
Thanks
Madhusudan
kelleg
4.5K Posts
0
February 26th, 2013 11:00
Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.
glen
Saul_K
31 Posts
0
February 28th, 2013 06:00
Its resolved !
We have to follow the below steps to to get the PowerPath v5.5 SP 01 to manage the Clariion/VNX LUNs:
->Need to edit the "/kernel/drv/fp.conf" and "/kernel/drv/iscsi.conf" to set the "mpxio-disable" parameter to "yes".
The mpxio-disable value must be set to yes in both the fp.conf and iscsi.conf files for PowerPath to manage the EMC VNX and Clariion Arrays
You must be Glen kelley from Clariion Core Support ?