This post is more than 5 years old
614 Posts
0
1486
PPME not able to abort sessions no matter what
Hi, had issues when executing PPME 5.5 for luns over 2TB. Kept causing issues so we tried to install 5.7 sp1. In the meantime, I could not abort the sessions. We tried everything, rebooting, stopping migration services, etc.
Thanks in advance! - Admingirl
christopher_ime
2K Posts
0
November 20th, 2013 17:00
Normally you'd run the powermig recover command; however, you should consider restarting from scratch. At this point you should issue for that handle:
powermig cleanup (with the -force flag)
Review the following document:
https://support.emc.com/docu42986_PowerPath-Family-5.7-CLI-and-System-Messages-Reference.pdf
Just search for: "needsRecovery" and it will walk you through it.
admingirl
614 Posts
0
November 21st, 2013 04:00
Thanks so much Christopher!
jlkansascity1
4 Posts
0
July 22nd, 2016 15:00
I don't know if I'm doing something wrong but when I click on Christopher's link, I get prompted to login (again) and the credentials I used to get here don't work. Is that some other site?
JL
kelleg
4.5K Posts
0
August 1st, 2016 14:00
I just tried the link and it's still working. You could try going to support.emc.com and doing a search for the document referenced above.
glen