This post is more than 5 years old
5 Posts
0
6537
Replace standby power supply from cx4 to cx3
Hi,
Unfortunately I do not have much knowledge about the EMC Clariions but let me try out this forum perhaps the answer is simple.
We have two clustered Clariion systems, a clustered CX4-120 and and a clustered CX3-10c, by clustered I actually mean a primary location that is replicated to a secondary location.
Here is the problem, the CX4 is not used anymore and the CX3 will be out of service in a couple of months, there is no support on the CX3.
The CX3 has both standby power supplies faulted and the idea is to replace these with the ones from the CX4.
I can hear you think, IDIOT but who am I tell you otherwise
From what I can see the standby power supplies are the same, perhaps the one from the CX4 has more power (A) but the output is the same.
Here comes the question(s):
- Can I use the SPS from the CX4 in the CX3
- What is the procedure to replace these with the systems online
AnkitMehta
1.4K Posts
0
December 11th, 2012 01:00
No I am not sure about this. I have seen cases where it works but there also times it gives out battery testing alerts too. So I would not recommend this as it does not show up compatible in Parts Guide.
In a gist, it can replace but its not compatible.
UL1st Edition makes it compatible from which I can say that it can replace. However, difference in W is something I am not sure that How it would impact, if any.
AnkitMehta
1.4K Posts
0
December 10th, 2012 19:00
What is the Part Number of the SPS in CX4?
What is the FLARE Version and SPS Part Number used in CX3?
Follow the Procedure Generator (SPS Replacement for step by step instructions)
https://support.emc.com/products/CLARiiONCX4.aspx
https://support.emc.com/products/CLARiiONCX3.aspx
Bassie1975
5 Posts
0
December 11th, 2012 00:00
Hi Ankit,
Thanks for your answer and info.
The Flare version on the CX3 is 03.24.010.5.011
The part numbers for the CX3 and CX4 are
CX3
p/n 078-000-062
CX4
p/n 078-000-064
AnkitMehta
1.4K Posts
0
December 11th, 2012 01:00
It doesn't show under matrices directly that you can replace 078-000-064 instead of 078-000-062. However, both SPS are UL 1st Edition so I reckon, we might be able to replace it.
AnkitMehta
1.4K Posts
0
December 11th, 2012 01:00
No Problem. Happy to help!
Bassie1975
5 Posts
0
December 11th, 2012 01:00
Thanks for your help, much appreciated!
AnkitMehta
1.4K Posts
0
December 11th, 2012 01:00
True. I missed that part completely, my bad. In that case, you can not replace CX3's 1000W SPS with CX4's 1200W SPS.
Bassie1975
5 Posts
0
December 11th, 2012 01:00
I think the only difference is that the CX3 powersupply is a 1000W unit and the CX4 a 1200W unit.
Bassie1975
5 Posts
0
December 11th, 2012 01:00
Hi Ankit,
The 1200W version has more capacity but the output for the shelves and sp's should be the same.
Are you sure this will not work?