Unsolved
This post is more than 5 years old
388 Posts
0
4760
Storage Array Faulted Bus 0 Enclosure 0 : Faulted after SPS Test
Our new manager finds the aforementioned weekly error message annoying.
Just wonder whether there is any harm to disable the Event 2580 Error from the template ? Do we need Engineering Mode to do so ?
Thanks
Jyothi_P_Bharat
317 Posts
1
December 11th, 2013 04:00
Hi Tony,
The event number 2580 should be unchecked in the monitor template. According to EMC Engineering, event 2580 event is always called during an SPS test even if the SPS has no problems. That is why this event is not monitored. If there is a problem with the SPS, a subsequent event will identify the problem and dial home.
Note: Navisphere may need to be in engineering mode in order to access the template properties.
For more information please refer EMC KB article 45307.
Thanks
Jyothi
TonyJK2
388 Posts
0
December 11th, 2013 20:00
Hi,
Since we are using the same template for both CX4-120 and VNX5100 SAN, would it be a problem for VNX SAN if we unselect the Event Number 2580 ?
Thanks