Wyman_chen
2 Iron

Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

Be cause  I has some problems in the "ODBS_INVALID_REV_PANIC" error issue ,an old CX3-40f strorage system gones rolling reboot long time , It need the 03.24.040.5.019.mif file re-image SPs out this problem ,but I can't find it on the services partner  web ,who can give me a download link?


checking the boot logs,that “WARNING: Disk 2 Failed" word it means the vault disks disk 2  failed ,it needs rebuild, both SPs in a rolling reboot  again and again

************************************************************

*                 Extended POST Messages

************************************************************

WARNING: Disk 2 Failed TUR

************************************************************

DDBS: K10_REBOOT_DATA: Count = 4

DDBS: K10_REBOOT_DATA: State = 0

DDBS: K10_REBOOT_DATA: ForceDegradedMode = 0

DDBS: SP B Normal Boot Partition

DDBS: MDDE (Rev 200) on disk 1

DDBS: MDDE (Rev 200) on disk 3

DDBS: MDB read from both disks.

DDBS: Chassis and disk WWN seeds match.

DDBS: Second (secondary) disk needs rebuild.

DDBS: First disk is valid for boot.

int13 - READ PARAMETERS (1569)

int13 - CHECK EXTENSIONS PRESENT (1570)

int13 - GET DRIVE PARAMETERS (Extended) (1571)

int13 - READ PARAMETERS (1618)

int13 - CHECK EXTENSIONS PRESENT (1619)

int13 - GET DRIVE PARAMETERS (Extended) (1620)

...

Labels (1)
0 Kudos
1 Solution

Accepted Solutions
Wyman_chen
2 Iron

Re: Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

I was contact EMC technical support to fixed the problem ,thank you !

I has re-image 03.24.040.5.019.mif revocer boot image and replace the 0_0_2 disk ,they are working good now.

View solution in original post

0 Kudos
6 Replies
Roger_Wu
5 Rhenium

Re: Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

I can only find FLARE-03.24.040.5.011.mif on EMC Service Partner Web. It should also work for you.

cx3_mif.png

You can speek Chinese? For further discussion, you might go to ECN Chinese forum https://community.emc.com/go/chinese.

vipinvk
4 Tellurium

Re: Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

You may request for the same from software@emc.com.

Just curious, have you tried copying image from utility partition (from boot log DDBS: First disk is valid for boot).

Wyman_chen
2 Iron

Re: Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

I was contact EMC technical support to fixed the problem ,thank you !

I has re-image 03.24.040.5.019.mif revocer boot image and replace the 0_0_2 disk ,they are working good now.

View solution in original post

0 Kudos
vipinvk
4 Tellurium

Re: Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

Did you download recovery image or was it a re-image from utility partition ?

0 Kudos
yage12
2 Bronze

Re: Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

I need 03.24.040.5.019.mif. could you help me ?

Please send me an email:<Email id removed>

 

Look forward to your reply!!

0 Kudos
kelleg
5 Rhenium

Re: Who has the 03.24.040.5.019.mif for CX series recovery image file?I can't find it in powerlink services partner web

Jump to solution

Was your question answered correctly? If so, please remember to mark your question Answered when you get the correct answer and award points to the person providing the answer. This helps others searching for a similar issue.

glen

0 Kudos