Unsolved
This post is more than 5 years old
4 Posts
0
679
.conf or .bin file that can hold clariion config in case of rebuild.
I just want to put this in IDEA but , no access to it. Why cant the Clariion engineers place a .bin file or .conf file for clariions. This will make the configuration changes in one click and during array failures o re-building the array these .conf or .bin files will be helpful to get the array back to where it is sooner and as is before to crash.
Please consider the view and discuss the possibilities and concerns.
christopher_ime
2K Posts
0
October 9th, 2011 20:00
Review the Navisphere CLI Guide for the following:
1) arrayconfig -capture
2) arrayconfig -duplicate
[...]
This generated file can be used as a template to configure other storage systems or rebuild the same storage system if the previous configuration is destroyed. The information captured may include:
◆ Software installed in the storage system (name of the software, revision, and so on).
◆ Physical configuration of the storage system (storage processors, disks, enclosures, and
so on.)
◆ Logical configuration of the storage system (RAID groups, LUNs, storage groups, clones,
SnapView, and mirrors).
◆ I/O port configuration information (hardware and logical configuration information) of
a CX4 series storage system. You can find the hardware information in CLARiiON ➤
Physical ➤ StorageProcessors ➤ StorageProcessor ➤ IODevices and the logical
configuration information in CLARiiON ➤ Logicals ➤ IOPorts.
[...]
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
October 20th, 2011 07:00
Hi Chris,
Can you be more specific and full command , which flare it starts from is it from and is it navicli or naviseccli.