Unsolved
This post is more than 5 years old
3 Posts
0
622
newbie question on emc cx3
Hi All,
I'm a brand new member and have a couple of basic questions.
Can you all give me some basic pointers about managing my emc cx3 model 20 clariion san?
Should I use Navisphere and Celerra on my Windows 7 workstation, and what are each basically used for? Where can I find these to download?
Thanks a lot!
P@trick
Vipin VK
812 Posts
1
October 21st, 2014 08:00
CX3-20 is a SAN device and can be managed via Navisphere manager (by entering the storage processor IP address in web browser). If you have celerra components attached with the SAN, you can access this via Unisphere manager/Celerra manager by pointing the IP of the control station.
P_11
3 Posts
0
October 21st, 2014 09:00
Thanks for the info Vipin V.K. !!! So if I need to carve out new space say 2tb for a backup repository and create my Luns, do I use navisphere or unisphere? Thanks for your help!
Vipin VK
812 Posts
0
October 21st, 2014 09:00
If you know the IP address of the SP and the login credentials, you may try accessing the Navisphere Manager by entering http://SP_IP_address/ in the browser.
Roger_Wu
4K Posts
0
October 21st, 2014 18:00
A good website for CX3 newbies
http://corpusweb130.emc.com/upd_prod_CX3/
P_11
3 Posts
0
October 22nd, 2014 14:00
Thanks Roger