reset factory emc cx500

A dedicated adapter for CX500 is required to access the equipment.

Power supply seems to be not for CX500..(Do not use for DPE CX500, there is dedicated power supply for CX500.)

Hi,

This thread has some information on connecting to the console. https://community.emc.com/thread/127455?start=0&tstart=0

Josh Craig

Dell EMC Enterprise Support Services

Get support on Twitter @DellCaresPRO

its correct and working properly.my problem is i cant establish PPP connection  and connect to cx500 . error is 777.anyone know what should i do?...

On the CX500 when you first connect using the serial port, you set the baud rate to 9600 - this should show the boot operation. Once boot is finished, then you need to set the baud rate to 115200 so that you can use Navisphere. Then you need to use a Web browser to access Navisphere - with the CX500, you need to use IE with Java 6 update 30 only. You need to uninstall all java and only install 6.30.

glen

i connected null modem cable to cx500 and connected serial to usb to my pc. i run hyperterminal and boot emc cx500 then hyperterminal show boot log. but i cant  establish PPP connection. can u help me ?

First, do you have the small cable that connects to the back of the SP that the null modem is connected to?

CX500 <-> CX500 cable <-> null modem <-> PC Serial Port (in your case usb)

I've never tried the serial to USB cable before, but it should work. As long as you can set the baud rate, parity for the connection it should work.

Please see the following thread:

https://community.emc.com/docs/DOC-8449

Use the section:

Setting Up the Dial-Up PPP Support:

Once you have setup the connection, the open IE and in the address bar pye in the address 192.168.1.1. This should start Navisphere.

glen

What desktop OS do you use?

I guess you use Windows 10.

I suggest installing Windows 7 in a virtual machine and connecting.

how i can get cx 500 cable? what exactly name this cable?