Unsolved
This post is more than 5 years old
99 Posts
0
981
Control Station trying to pxe boot
Customer installed his own Celerra and everything looked fine. After installation he turned off the Celerra and CS again and went home.
He tried to turn on his Celerra again but now his CS is trying to do a pxe boot and not coming up again.
What might be the problem here, a lost HDD?
Regards,
John
He tried to turn on his Celerra again but now his CS is trying to do a pxe boot and not coming up again.
What might be the problem here, a lost HDD?
Regards,
John
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
April 8th, 2009 05:00
jgrinwis
99 Posts
0
April 8th, 2009 08:00
Rainer_EMC
8.6K Posts
0
April 8th, 2009 09:00
It that doesnt help please call EMC support
jgrinwis
99 Posts
0
April 9th, 2009 03:00
One other thing, isn't is possible to use F2 to get into the BIOS anymore?
BillStein-Dell
Moderator
Moderator
•
285 Posts
0
April 9th, 2009 09:00
In any event, please open a case with EMC Tech Support who can assist you further.
Rainer_EMC
8.6K Posts
0
April 21st, 2009 06:00
jgrinwis
99 Posts
0
April 21st, 2009 07:00
jgrinwis
99 Posts
0
December 3rd, 2009 03:00