Unsolved
This post is more than 5 years old
47 Posts
0
1397
EMCOPY
Can someone tell me how to start ? I need to migrate 2.4 TB NAS from an old ns600 to a new NS120, All CIFS and includes VDMs,
Thanks!
Unsolved
This post is more than 5 years old
47 Posts
0
1397
Can someone tell me how to start ? I need to migrate 2.4 TB NAS from an old ns600 to a new NS120, All CIFS and includes VDMs,
Thanks!
Top
Rainer_EMC
8.6K Posts
0
January 7th, 2010 01:00
I would start with the EMC Utilities manual from Powerlink and the EMCcopy readme
also make sure you get a recent emcopy - like version 4.0.2 from the 5.6.47 Tools&Apps CD (Powerlink)
kchuemc
19 Posts
0
January 7th, 2010 14:00
Hi!
If you have the IP Replicator license, you may also want to investigate using that for the migration...
Kelvin
rpereira1
47 Posts
0
January 7th, 2010 14:00
BillStein-Dell
Moderator
Moderator
•
285 Posts
0
January 8th, 2010 08:00
Actually, it can be. A RPQ can be submitted to allow the upgrade to 5.6 on the source box ONLY FOR the purpose of migrating. No continuing production will be supported on a NSX00 series running 5.6. Contact your local team and request this.
rpereira1
47 Posts
0
January 8th, 2010 09:00
Thanks Bill I didn't know this was available, this could really alleviate a lot of problems
Ron