Unsolved
This post is more than 5 years old
2 Posts
0
1390
I am having trouble with Celerra Manager response times, any settings I can do to help?
I am having the same issue w/ IE8 and Firefox...just slow when clicking on any item in Celerra Manager...takes like 10 seconds ++ to load anything up..I don't think its a network issue, just maybe something to tweek on the browser side to help? thanks,
SAMEERK1
296 Posts
0
August 18th, 2010 11:00
As per the release notes, the IE8 is still not supported by Celerra manager hence I suggest you to try it by using the IE6 and test the same,
check also if you have too many old alerts showing up in the Celerra manager and if you can clean up few of old alerts.
SOMECNScreennam
2 Posts
0
August 18th, 2010 11:00
NS-120’s running Celerra Manager Advanced Edition v. 5.6
Rainer_EMC
8.6K Posts
0
August 18th, 2010 11:00
ok - no gateway - there was a bug delaying startup with NS-G2/8 recently
Rainer_EMC
8.6K Posts
0
August 18th, 2010 11:00
what Celerra model?
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
August 18th, 2010 18:00
reboot the control station, see if it helps. Celerra Manager is notoriously slow and the more objects it manages the slower it gets.
Rich_Bai
25 Posts
0
August 25th, 2010 18:00
It appears that some suggestions have been given for the question you asked. Are they helpful? If so, please mark the question as "Answered".
Your feedback and response is appreciated.
Thanks!
ScottHolmanBG
13 Posts
0
August 26th, 2010 07:00
we've a pair of NS-G8's that have always had problems with delayed response times. one more that the other actaully. we're currently on 5.6.47-11. In which code level is this resolved?
cheers