Unsolved
This post is more than 5 years old
265 Posts
0
447
NS-120 assign public IPs for SPs
The CSA worksheet (page 32) listed public address "Storage processor A" IP address, and "Storage processor B" IP address. But the page 3 listed them as internal IP address. Which is correct?
the SPA mgmt port is connected to Blade 2 ,and
SPB mgmt port is connected to Blade 3
can I disconnect them and connect SPA mgmt and SPB mgmt to customer LAN switch ? inorder to be able to access Navisphere Manager
Rainer_EMC
8.6K Posts
1
June 21st, 2011 05:00
Each SP has *both* an external *and* an internal IP address
access to NaviSphere / UniSphere is done by logically connecting to the external IP - but physically you will be talking to the control stations managment port (it proxy-arps for it), which will forward these packets to the SP over the internal network
PLEASE cable the systems exactly how its shown in the installation docs.
Do not connect the SP's management ports to an external network - it will not work and it not necessary
Rainer