Unsolved
This post is more than 5 years old
3 Posts
0
1983
No cepp server is defined.
Hi all,
I have been struggling to resolve the error below, the config file is configured correctly but the service on the EMC Celerra server will not start because of the error,
I have been following the instructions to the letter but can you tell me if where i have highlighted in the screen shot, should i be putting the Mover server in there instead?
Thanks Inadvance
spookrider
3 Posts
0
January 29th, 2018 08:00
Hi,
Thanks for getting back to me.
I am using Data Insight 5.2.2 to get events from a celerra filer and this is the first time this has been installed.
Thanks inadvance
Rainer_EMC
8.6K Posts
0
January 29th, 2018 08:00
what are using CEPA for ?
which application is used to receive to the events ?
did it work before ?
Rainer_EMC
8.6K Posts
0
January 30th, 2018 09:00
whats you system model and OE version ?
spookrider
3 Posts
0
January 30th, 2018 11:00
Hi,
Thank you for getting back to me.
My colleague downloaded the EMC CAVA product and installed it without any issue, i am not quite sure what version this was i'm afarid but i will try to find out.
Since then we have re-cretaed the cepp.conf file and now i get the error "Error 13162905611:Server_2 No CIFS found on the Data Mover"
Is it a pre-requiste to have CIFS on the data mover?
Thanks inadvance
Rainer_EMC
8.6K Posts
0
January 31st, 2018 07:00
I think you do unless you have a global CIFS server defined - thats what the CEE manual says
NS40G is quite old - it went end-of-support 3 years ago in January 2015
Are you SURE that your combination of Celerra OS, CEE version and Data Insight version was ever supposed to work together ?
what is your purpose - home lab or computer museum ?