Unsolved
This post is more than 5 years old
45 Posts
0
433
Regrading Control luns from backend DMX-4
Hi,
Even we have to set emulation=celerra_FBA for control luns? This is the first time we are allocating storage to NSX with DMX-4 as backend do we need set any other settings for DMX-4 or NSX.
Thanks,
Even we have to set emulation=celerra_FBA for control luns? This is the first time we are allocating storage to NSX with DMX-4 as backend do we need set any other settings for DMX-4 or NSX.
Thanks,
raja4
45 Posts
0
April 6th, 2009 08:00
Thank you.
Anonymous
5 Practitioner
5 Practitioner
•
274.2K Posts
0
April 6th, 2009 08:00
Hope this will help.
nandas
1.5K Posts
0
April 6th, 2009 08:00
Hope this answers your query - please feel free to revert back.
Regards,
Sandip
BillStein-Dell
Moderator
Moderator
•
285 Posts
0
April 7th, 2009 12:00
If this is a new install, NSX is not customer-installable. Your field service team should be performing this installation for you. You should contact the field team to schedule that install.
If you are simply adding storage to an existing NSX which has a backend array already, there is no need to add control LUNs; in fact, it would be very bad to do so.
If you need assistance with adding storage, I suggest you contact your local field service team for assistance.
-bill