Unsolved
This post is more than 5 years old
7 Posts
0
4109
VNX 5300 Integration with Symantec Vault for Archival
Hi,
I am trying to integrate and authenticate Symantec Vault to be used for VNX5300 FS archival however receiving following error while running the last step.
Celerra Account for Symantec Vault authentication is "evadmin"
Symantec Domain account "svc-in-evadmin"
Steps and it Output for reference:-
#server_http server_2 -info dhsm
server_2 : done
DHSM FACILITY CONFIGURATION
Service name : EMC File Mover service
Comment : Service facility for getting DHSM attributes
Active : True
Port : 5080
Threads : 16
Max requests : 300
Timeout : 60 seconds
ACCESS CONTROL
Allowed IPs : 10.0.25.1
Authentication : digest ,Realm : DHSM_Authorization
Allowed user : evadmin
SSL CONFIGURATION
Mode : OFF
Persona : default
Protocol : default
Cipher : default
# fs_dhsm -connection Datagrp -info
Datagrp:
state = enabled
offline attr = on
popup timeout = 0
backup = passthrough
read policy override = passthrough
log file = on
max log size = 10MB
Error message while running the last step:-
# fs_dhsm -connection FS1 -create -type http -secondary "http://10.0.25.1/EnterpriseVault" -user svc-in-evadmin@local.com -password 123456 -cgi n
Error 13159628829: The HTTP server failed to respond to an OPTIONS method of the HTTP protocol with a status code 1002 Authentication scheme not supported.
We had successfully installed the same on EMC NS-120 however now facing an issue with VNX 5300. Any quick suggestions would really help...!
Regards,
Swapnil Mistry
PeteOrton
9 Posts
0
December 21st, 2011 02:00
Will do thanks
Rainer_EMC
8.6K Posts
0
December 21st, 2011 02:00
Have you considered just open a service request ?
I think its more efficient for this than the forum
Rainer
swapnil_mistry
7 Posts
0
December 21st, 2011 21:00
Hi Peter,
What is the OS of your Enterprise Vault server? I was able to run fs_dhsm command after making changes to the IIS configuration i.e enable Basic Authentication.
To make changes to IIS configuration, follow below steps on your Vault Server If it is a windows 2008 server.
Go To Start -> Administrative tools -> IIS Manager -> Expand the root path --> Sites -> Default Websites -> enable Basic Authentication
See if it helps to resolve your issue as well ☺