Unsolved
This post is more than 5 years old
8 Posts
0
911
Vnx 5300 Logging for Entreprise Vault
Hi, I'm using a VNX 5300 with Entreprise Vault 9.0.3. When looking at the celerra volumes properties, it tells me that I need to enable the "Celera Logging" to be able to delete expired archived items. So far I did not find the procedure to do so. Any tip welcome. Thanks.
Rainer_EMC
8.6K Posts
0
November 26th, 2012 08:00
What exactly does it say? Logging or locking or retention lock (FLR)?
I would suggest to look at the Symantec documentation for support site for details
Jetintake
8 Posts
0
November 27th, 2012 00:00
Hi
It says "Logging". (see screen cap attached to original post)
I went though all the Symantec site and KB, and if I found several references to this "Logging" but without any information on how to enable it... One doc says makes reference to FileMover Logging...
http://www.symantec.com/business/support/index?page=content&id=HOWTO49558
BillStein-Dell
Moderator
Moderator
•
285 Posts
0
November 29th, 2012 09:00
The DHSM connection needs to have logging enabled in order to have the archived file deleted when the stub (or placeholder) is deleted or recalled. Use the fs_dhsm command on the Celerra to do that.
First, get the connection information:
Notice that logging is off. You will need to enable logging:
Once this is done, go back to the original screen you listed and click "Test Celerra Logging" and this test should succeed.