Unsolved
This post is more than 5 years old
301 Posts
0
550
cifs audit question
Goal:
I have a cifs server with two interfaces, lets call them A and B.
Connections via A are correct. Connections via B are being phased out.
Is there a cifs audit command to provide not the client or destination, but rather how the data was accessed, i.e. either through interface A or B ?
Rainer_EMC
8.6K Posts
0
January 12th, 2016 09:00
You could try server_tcpdump
Server_netstat should also show currently open connections