Unsolved
This post is more than 5 years old
63 Posts
0
3081
cifs server unable to join domain
Hi all , I got a physical data mover server_2. I have created a VDM on it and one cifs server on it. All working fine.
now i got requirment to create another cifs server on physical data mover , is it possible ??
I tried it with new ip but it was giving me error , unable to join -check server logs.
Any idea ?? I thought i will create computer account with name in AD first and then try joining but it failed.
OnlySandy
63 Posts
0
October 14th, 2011 04:00
I just resolved it. OU name has to be : seperated . It worked now. Thanks
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
October 14th, 2011 04:00
What’s in the log file ? (server_log server_2)
Rainer_EMC
8.6K Posts
0
October 14th, 2011 06:00
Yes, you can either create a 2nd CIFS server in your existing VDM or create a new VDM with a CIFS server depending on whether you need to access the same file systems or whether you need to isolate the data
Rainer
SHAH-ITENG
5 Posts
0
December 26th, 2015 04:00
Dear I had the same problem
but now i have resolve it.
You can also try I did.
open Active Directory or your DC ->go to Computer->RightClick on Computers->New Computer->give the name of your EMC-Celerra.
after above process go again on Unisphere and create your CIFS Server type your domain name and join it with your credentials and organizational unit type Computers:EMC-Celerra. then apply ok .
I hope it will show domain joined.