This post is more than 5 years old
46 Posts
0
5222
how to get storage pool totals from control station command line
Is there a command or commands we can run from one of our NAS control stations to list the storage pool totals? If we run Celerra Manager and select "Storage" then "Pools" we can get a nice graphic display with the "Storage Capacity" for each of 7 pools that we have defined. Can someone provide the NAS command that can be executed from command line that generates something similar? Thanks very much.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
September 15th, 2010 04:00
nas_pool -size
This e-mail message (including any attachments) is for the sole use of
the intended recipient(s) and may contain confidential and privileged
information. If the reader of this message is not the intended
recipient, you are hereby notified that any dissemination, distribution
or copying of this message (including any attachments) is strictly
prohibited.
If you have received this message in error, please contact
the sender by reply e-mail message and destroy all copies of the
original message (including attachments).
martinl1
46 Posts
0
September 15th, 2010 04:00
But ... we have a pool called sym_std that shows 10.8 TB allocated to it in the celerra manager gui. When I run
nas_pool -size symm_std
I get
zeros.
id = 1
name = symm_std
used_mb = 0
avail_mb = 0
total_mb = 0
potential_mb = 4548537
Why?
SAMEERK1
296 Posts
0
September 15th, 2010 04:00
nas_pool -size
This will give you the details,
you would also like to see more info my using
nas_pool -info
martinl1
46 Posts
0
September 15th, 2010 04:00
thanks!
martinl1
46 Posts
0
September 15th, 2010 06:00
nas_pool -list
id inuse acl name
1 y 0 symm_std
3 n 0 clar_r5_performance
10 n 0 clarata_archive
18 y 0 clarata_r6
28 n 0 TEST
29 y 0 cx3_ata
30 y 0 cx3_fc
umichklewis_ac7b91
300 Posts
0
September 15th, 2010 06:00
What is the output of nas_pool -list? Is there another pool using that space?
martinl1
46 Posts
0
September 15th, 2010 07:00
Interesting. The result :
$ nas_pool -size symm_std -slice y
id = 1
name = symm_std
used_mb = 6753458
avail_mb = 74058
total_mb = 6827516
potential_mb = 4548537
So ... total + potential gets us to 10+ TBytes. I wonder why total_mb is only 6827516?
Peter_EMC
674 Posts
1
September 15th, 2010 07:00
and look at the -slice explanation
[-slice {y|n}]
If y is typed, displays size information when volumes in the storage
pool are sliced. If n is typed, displays size information when
volumes in the storage pool are not sliced. The -slice option defaults
to the value of default_slice_flag for the storage pool.
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
September 15th, 2010 07:00
total is how much has been "grabbed" by the pool already, potential is how much capacity is still hanging out there and could be "grabbed" by the pool
umichklewis_ac7b91
300 Posts
0
September 15th, 2010 07:00
No problem - please reply back when they sort it out!
Karl
umichklewis_ac7b91
300 Posts
1
September 15th, 2010 07:00
Something seems a bit wonky if the GUI says the symm_std pool has 10TB allocated, but the command line says other wise. I'd check the totals on the other pools and compare it to the number in the GUI. If things don't match, I'd open a LiveChat session or a ticket. Someone could dial in and check the config - it sounds like the GUI and CLI don't agree.
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
September 15th, 2010 07:00
try
nas_pool -size symm_std -slice y
martinl1
46 Posts
0
September 15th, 2010 07:00
All of the other pool info is correct and I know the symm_std pool should be showing 10+ TBytes. I will open a case in Powerlink. Thanks.
martinl1
46 Posts
0
September 15th, 2010 07:00
thanks everyone for the excellent assistance.
Rainer_EMC
8.6K Posts
0
September 15th, 2010 08:00
try nas_pool