Unsolved
This post is more than 5 years old
9 Posts
0
599
iSCSI Lun from Clariion-part of NS-20?
I think I got a partial answer by searching the forum but as a direct question:
Can I somehow use iscsi directly on the CX3-10-part of an NS-20?
Purpose? MirroView/A.
Regards,
Anders
Rainer_EMC
8.6K Posts
1
November 19th, 2009 06:00
yes, if you have a FC and NaviSphere license and the CX3-10 has an ISCSI port
right now you should get permission to do so via RPQ - that will be lifted soon
ablomgren
9 Posts
0
November 19th, 2009 07:00
I'm awaiting a quote on converting the NS-20 to NS-20FC right now. Does the NS-20FC have an ISCSI port? The SP's that are in the non-FC version do not seem to have one.
RPQ.. Request Price Quote?
Regards,
Anders
dynamox
2 Intern
2 Intern
•
20.4K Posts
1
November 19th, 2009 07:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 19th, 2009 07:00
dynamox
2 Intern
2 Intern
•
20.4K Posts
0
November 19th, 2009 07:00
ablomgren
9 Posts
0
November 19th, 2009 07:00
Seems to be 3 different SP versions for that particular Clariion.
Regular CX3-10c has 4 FC and 2 ISCSI
NS-20-CX3 has 2 FC
NS-20FC-CX3 has 6 FC
As far as I understand it, the only way I could replicate Clariion luns over ip from an NS-20FC would mean RecoverPoint (ouch!).
Regards,
Anders
Rainer_EMC
8.6K Posts
1
November 19th, 2009 07:00
you're right - NS20FC doesnt have Clariion ISCSI ports and from what I remember the CX3-10 can have either FC or ISCSI ports but not both
I was thinking NS-120 - the CX4 line is more modular and you can have both there