Unsolved
This post is more than 5 years old
5 Posts
0
4316
internal error: OnTAPI: OnTAPI: Error in System-get-version HTTP POST - Internal error
I am getting the following error when trying to add OnTAP 8.3 cDOT (cluster mode) as NAS Server.
internal error: OnTAPI: OnTAPI: Error in System-get-version HTTP POST - Internal error
Rainer_EMC
8.6K Posts
0
August 9th, 2017 03:00
after checking the release notes for your CTA version that the NetApp OS version is indeed supported
Rainer_EMC
8.6K Posts
0
August 9th, 2017 03:00
I would suggest to raise a service request
abdusnaser
5 Posts
0
August 14th, 2017 07:00
Thanks Rainer_EMC for your quick response. However the release notes that I came across, doesn't talk about the version of NetApp and the instructions listed to configure NetApp reflect the NetApp 7-Mode. I found a document, "CTA and CTA/VE 10.0 SP3.1 Interoperability Matrix EMC Part Number = 300-014-320 Rev.10" accoring to this document Cluster Mode is not supported (please see the page 4), the document link is: https://support.emc.com/docu55062_CTA-and-CTA-VE-10.0-SP3.1-Interoperability-Matrix.pdf?language=en_US&request=akamai
If you have any updated release notes, that has listed NetApp 8.3 Cluster Mode (cDOT) as supported verson, would please paste the link here?
abdusnaser
5 Posts
0
August 14th, 2017 07:00
Thanks Rainer_EMC for your quick response. However the release notes that I
came across, doesn't talk about the version of NetApp and the instructions
listed to configure NetApp reflect the NetApp 7-Mode. I found a document,
"CTA and CTA/VE 10.0 SP3.1 Interoperability Matrix EMC Part Number =
300-014-320 Rev.10" accoring to this document Cluster Mode is not supported
(please see the page 4), the document link is:
https://support.emc.com/docu55062_CTA-and-CTA-VE-10.0-SP3.1-Interoperability-Matrix.pdf?language=en_US&request=akamai
If you have any updated release notes, that has listed NetApp 8.3 Cluster
Mode (cDOT) as supported verson, would please send me the document or the
link?
Abdus S. Naser
BSEE, MCP, EMCPP, CNA, CompTIA A+
Systems Engineer
Mobile:+1 862-247-5524
Email: Abdus.Naser@gmail.com
LinkedIn: www.linkedin.com/in/ abdus-s-naser
On Wed, Aug 9, 2017 at 6:13 AM, Rainer_EMC
Rainer_EMC
8.6K Posts
0
September 4th, 2017 07:00
Hi,
CTA currently supports Ontap 8.2.7 in 7-mode
For 8.3 7-mode please ask via RPQ through your sales or partner.
Ontap 8 in clustered mode will not be supported.